Skip to main content

How to Know If It Is A Bad EGR Cooler?

Maintaining an EGR cooler is not a hard task if you know when it needs your attention. There are certain symptoms that can be observed which will help you repair the EGR cooler or get it replaced.

Let us now have a look at the symptoms that might suggest that it is a bad EGR cooler and that it might need a replacement. One can choose EGR coolers from Navistar or Cummins like Navistar maxxforce 9 EGR cooler as they are affordable and of the best quality.

The Symptom 1: There can be a loss of coolant from the degas bottle or from the cooling system. The reason for the same can be unexplained and this can only occur when you have a faulty EGR cooler. Experts always suggest users go with reputed ones like Cummins ISX EGR coolerWhen there is a leakage in the EGR cooler, the coolant can get leaked into the exhaust system but does not come outside of the engine. A number of people often ignore this kind of a warning sign and this can turn out to be quite expensive for them. The longer one ignores this, the more of the coolant gets leaked out from the engine and it can worsen the situation.

The Symptom 2:  If you find that white smoke is coming out of a tailpipe, then it can be steam. If you ignore the symptom 1, the coolant that gets leaked might get in

to the exhaust system and this can vaporize easily and then it would turn the liquid to the steam and the same is seen coming out from the exhaust. To avoid such problems, one can choose coolers like Navistar maxxforce DT EGR cooler.



The Symptom 3: While the leaking of the coolant need not say that the cooler you have is a bad one. It can also be a sign of the engine oil cooler getting plugged and this can restrict the coolant’s flow from reaching the EGR cooler. As the cooler does not get the needed coolant, it can start to boil and the same can create a high-pressure pockets of steam which will come out from the degas bottle. This will also force the coolant from the lid. If such an instance occurs, then you certainly need to replace the EGR cooler. There is a need for this as the cooler is also overheated and is overly stressed and there are chances that it might fail in future. If there is a need to replace, you can choose the Navistar maxxforce 10 EGR cooler or the other suitable models. These are known to be reliable and are of superior quality.

How Can One Diagnose If Your EGR Cooler Is A Bad One?

Well, there is a much easier method to do this. All you need to do is a simple test keeping the above-mentioned symptoms in mind. You need to turn the rig off when you are planning to test the cooler. If your EGR coolers looks steam cleaned or wet, then there can be a problem with it.

Comments

Popular posts from this blog

WHAT IS THE MOST RELIABLE VOLVO TRUCK ENGINE AND WHY?

Which Volvo truck engine has the best reliability and why? You should always research the transmission and engine of the truck you intend to purchase. For the purposes of this blog, we'll keep the debate to Volvo trucks. Which  Volvo engine  is therefore the most reliable? Let's begin by listing the advantages of purchasing a Volvo truck.   Volvo D11 The first item on our list is the  D11 , which can be configured in the VNR, the VNL VHD, and the VAH. Because of its low weight of just 2259 lbs, 325HP, and 1250lb-ft of torque, the D11 can tow your daily products with ease. It has a typical SOHC engine with four valves per cylinder. Performance is increased and the common rail injectors system is trustworthy for the whole life of the truck.   Volvo D13 The following in line is the  Volvo D13 engine . The D13 is usually regarded as the category's most flexible engine. A variety of HP variations are accessible, including the 375, 406, 425, 435, 455 and 500. As...

NAVISTAR ADDING SCR TO MAXXFORCE 9 AND 10 ENGINES

Thanks to Navistar, the MaxxForce 9 and 10 engines have SCR.   By equipping its  MaxxForce 9  and  MaxxForce 10  engines with selective catalytic reduction (SCR) aftertreatment, according to Navistar, it will complete the conversion of its mid-range engines to SCR.   The company previously sold the International DuraStar with the  Cummins ISB 6.7 engine . The MaxxForce 9 and 10 can fit in vehicles with DuraStar and WorkStar engines.   According to Bill Kozek, President of North America Truck and Parts at Navistar, "We have great expectations for this chassis/engine combination as we watch the construction sector continue to recover." "Our medium-duty shift to SCR was successful with our DuraStar with Cummins ISB6.7."   Because we are aware that some of our customers require greater horsepower and torque, we are pleased to provide these customers with an alternative engine option by incorporating SCR into our 9-liter and 10-liter engines. ...